Retrofitting and Repair Services

Qualitrol International has experience repairing nearly any PLC or PLC components to get your PLC working again while providing you with peace of mind. Whether your industrial monitor, HMI, display, or any other component fails, our IPC-7711/7721 certified technicians can get your part working again. If you need a retrofit or are looking for remanufactured parts, Qualitrol has what you need.

Check out what we offer for your PLC’s retrofitting and repair services!

Repairs

When you send us your part to be repaired, we immediately conduct a no-charge evaluation. During the evaluation we’ll figure out what’s wrong and where it went wrong. We only begin the repair after we notify you what’s wrong and have your authorization to continue!

Your repair will then get a replacement for all components that don’t work, except for LCD and touchscreens. We also replace components that have a high failure rate, such as inverters. We then test your repair—a 24-hour burn-in and system test are conducted to ensure your part works. After it’s fixed, we clean the entire system before shipping it back to you.

Remanufactured Products

Remanufactured products and services are great options because they save you money, yet they work just as well as new parts. All of Qualitrol International’s remanufactured PLC parts are thoroughly updated and tested to be like new for you.

We also offer all basic repair services with our remanufactured parts. We’ll replace your LCD and touchscreen if needed, and paint anything that needs to be touched up on the exterior surfaces. Our remanufacturing services get you what you need at a great price. Don’t forget our turnaround time is just days—not weeks!

Retrofitting

Qualitrol International also offers retrofitting services when you need them. Our technicians are experts at handling any retrofit you could possibly need. We can retrofit your flat panel display while keeping all your existing mechanical components. We’ll replace the electronics to be updated with the proper circuitry.

Our retrofit services include nearly every brand of industrial computer out there, including Allen-Bradley, Barco, Eurotech, Moxa, and Z Microsystems. When your unit can’t be repaired because the components are no longer available, a complete retrofit will keep your system working at a lower cost to you. Best of all, you’ll be able to install your unit back into the original cabinet. Match the current system with your old system to get a seamless retrofit that’s well within your budget!

Our Guarantee

In addition to being able to repair GE Fanuc and Siemens PLC, Horner Electric APG, and any other PLC you’ve got, we conduct in-house repair services, so your product will never be outsourced or sent somewhere else. Our guarantee also includes:

  • Your initial free evaluation
  • A 1- to 3-day turnaround time
  • Nothing owed if the product cannot be repaired
  • A 1-year warranty on all repairs

We’re here to give you peace of mind and simply the best repair and retrofit services at Qualitrol. Experience the difference with our certified technicians and quick turnaround time for all your repairs or retrofits!

When you need a PLC repair, Qualitrol is here for you. Our free evaluation ensures that nothing gets done without your permission. Your PLC, HMI, or industrial monitor can and will get repaired in just a few days. We can also retrofit your system as well as use remanufactured components to save you money. Send us your retrofit or repair!

Time limit is exhausted. Please reload the CAPTCHA.